New Wood Chipper Skorpion 250 R - Teknamotor

  • Offer
    18049354
  • Date
    2023-09-13
  • Status : expired

Product

Category type Chipper - Cleaver - Debarker
Category Hogger
Brand Teknamotor
Model 250 R

Specifications

Condition of the item New
Date of manufacture 2024
Volume 1 - 1 Convert
Weight 960
Description
Skorpion 250 R is designed for shredding tree limbs and trunks with a diameter of up to 250 mm. Skorpion 250R is a disc model with a pneumatic blow-out system on the disc. Chips are ejected through the rotating chimney which can turn by 360 degrees in relation to the chassis. The cutting system consists of a disc with cutting knives sharpened on either side.

The chipper has a three-point suspension system and is designed to work with an above 80 hp farm tractor. The drive is transmitted from PTO shaft of a tractor with the speed of 540 revolutions per minute.

Its feed system consists of two pulling rollers, driven by separate hydraulic motors from a hydraulic pump mounted on the chipper.

Safety of the operator of a chipper is ensured by a cable safety switch attached, which - by pulling the cord in any direction - causes the hydraulic feed system to stop immediately. Unlocking the system takes place by releasing / unlocking the EMERGENCY STOP button to the work position.

The wood chipper equipped with an electronic No-stress system that automatically prevents overloading of the drive system by temporarily stopping the feed system. Editing the No-stress overload system allows you to easily change the machine settings and adjust them to individual needs. The program "thick wood", "thin wood" allows a quick change of the working mode of the chipper to suit the currently shredded material and more effective work of the wood chipper. This system has a built-in hourly meter.

Chips made by Skorpion 250 R can be used as a solid fuel for heating in buildings (burning in ovens/stoves), as raw material to produce compost, for decorative purposes in gardens, parks, etc., and after additional disintegrating in a mill for production of pellets and briquettes.

Overall dimensions (length x width x height) 2500 x 2030 x 2560 [mm]
Weight 960 [kg]
Branch diameter 250 [mm]
No of knives 2 or 3 cutting + 2 counter-knife
Feeding speed up to 42 [running meters/min]
Chipping capacity up to 18 [stère meters/h]
Chip width from 9 to 14 [mm]
Feeding unit hydraulic feeder
Disk diameter 800 [mm]
Hopper dimensions (width x height) 420 x 255 [mm]
Min. power of tractor 80 [hp]

Equipment included:
-PTO shaft
-Independent hydraulic system
-Adjustment of height of ejecting the chips
-Rotary chimney 360°
-No-stress system

Additional accessories on request:
-Extension of the ejection tube

Price & Conditions

Price On demand
Sells to: Worldwide

Sellers

We are sorry, but this offer is no longer available. But that's okay! Just fill in the form below and you will receive tens of similar, fresh leads.

 I confirm that I have read and understood Fordaq’s Privacy Statement

By registering you agree to our General Conditions

Similar postings
offer 20 Mar 2024 12:06

New YANIGAV FBW-8,5 Wood Splitter Austria

from VKM GmbH
offer 20 Mar 2024 12:10

New Yanigav FB2000 / FB2000G / FB2000E Wood Splitter Austria

from VKM GmbH
offer 20 Mar 2024 12:15

New YANIGAV Log Splitter FB90 Austria

from VKM GmbH
offer 20 Mar 2024 12:14

New Yanigav Log Splitter Self-Loading FBA26 Austria

from VKM GmbH
The Fordaq Trust Rating gives an indication of the level of trust you can have in this company. The rating is built based on information we have available on this company. We are progressively expanding the rating to more companies so do not be surprised if many companies do not have a rating yet.

The type of information we use to build the rating:

  • What type of contacts have we had with the company?
    N° of phone contacts, visits by our staff, meetings at trade shows.
  • History of the activity of the company on the Fordaq website.
  • Does the company have certificates which have been verified by Fordaq independently?
  • Fordaq verified that the company is a member of a recognized industry association (federation, etc)?
  • Has the company been recommended by other members?